TJR 5th Axis Torque Motor Tilting Rotary Table - FAD Ø170

The FAD-170F features a Ø170 mm rotary table designed for both vertical and horizontal applications. It uses an add-on installation mode, making it suitable for CNC machining centers requiring compact 4th- and 5th-axis machining capabilities.

The rotary axis provides 360° rotation, while the tilting axis offers a range of -100° to +100°. This wide tilting range allows workpieces to be positioned at different angles for multi-axis machining operations.

Both the rotary and tilting axes use a Direct Drive transmission mechanism. Unlike conventional worm-and-gear rotary tables, the direct-drive configuration eliminates mechanical reduction gears, enabling high-speed and highly responsive axis movement. Both axes have a Direct Drive reduction ratio.

The FAD-170F provides a minimum programmable increment of 0.001°. The rotary axis has 20 arc-seconds indexing precision and 4 arc-seconds repeatability, while the tilting axis provides 30 arc-seconds indexing precision and 4 arc-seconds repeatability.

Both the rotary and tilting axes use pneumatic clamping rated at 0.6 MPa / 6 kg/cm². The rotary-axis clamping torque is 31 kgf·m, while the tilting-axis clamping torque is 45 kgf·m, providing secure positioning during machining.

The FAD-170F can be configured with major CNC servo motor systems including FANUC, Mitsubishi, Yaskawa, Siemens, Heidenhain, and Syntec. TJR specifically identifies Direct Drive (DD) Motor configurations for both the rotary and tilting axes for FANUC and Mitsubishi systems.

The rotary axis has a rated speed of 200 rpm and a maximum speed of 300 rpm. The tilting axis has a rated speed of 50 rpm and a maximum speed of 150 rpm, providing substantially higher rotational speeds than conventional geared rotary tables.

The FAD-170F supports a maximum workpiece load of 50 kg in the 0° horizontal position and 30 kg when tilted from 0° to 90°. Its allowable horizontal inertia load capacity is 0.28 kg·m².

The rotary axis provides 29 Nm rated cutting torque and 143 Nm maximum cutting torque. The tilting axis provides 48 Nm rated cutting torque, increasing to 118 Nm with oil cooling, with a 143 Nm maximum cutting torque. The allowable thrust load is 4,000 N / 407.8 kgf, with an axial moment of 450 N·m / 45.8 kgf·m and radial moment of 310 N·m / 31.6 kgf·m.

The FAD-170F features a Ø40H7 mandrel sleeve, Ø40 mm center through hole, and 250 mm horizontal table height. It uses a 12H7 T-slot and 18h7 guide block. The unit has a net weight of 220 kg including the Direct Drive motor.